Updating your GPS device is recommended to take advantage of new features and bug fixes.

To update your Lezyne GPS unit, you'll need a Windows or Mac computer. No other operating systems are supported.

Updating your Lezyne GPS

Plug your GPS device into your computer using your Lezyne micro USB cable. If you use another cable, it has to be a data micro USB cable, or it will only charge the device.

Download the latest update from the GPS Update page.

Scroll down, and select the appropriate updater for your computer operating system. Click on the appropriate link to download the updater program for your computer. NOTE: the version number may be higher than shown.

There are a number of ways your operating system and your browser might handle the download. Make sure that the updater file is downloaded and saved to your computer to a location you can find. 

Open and run the Lezyne GPS firmware update program.

While it is generally not needed, you can back up your GPS device settings periodically, or when performing an update. When you run the updater program, you'll see a pop-up window asking if you would like instructions on backing up your device. Click Yes to be instructed on how to back up your GPS device settings, No to continue.

The updater will connect to the GPS and display the current firmware version installed device.

While the updater is installing the firmware, do not unplug or attempt to operate the GPS unit. The update should only take a few minutes to complete.

When the installation is complete, you can click OK. This will close the updater. You can disconnect the GPS from your computer and get riding.

Note: You may need to re-pair your phone after a firmware update. If your GPS and phone are having connection issues, CLICK HERE for troubleshooting steps.